Hi, I tried connecting to my phone wifi now and it gives the same 'operation not possible due to rfkill' error and I cannot softunblock wifi now too. But as I said before, when I rebooted the board, the board actually connected to the phone wifi which I confirmed coz the phone showed the board as connected to it but it disconnects next moment and goes to the clanton login. Here is my wpa_supplicant.conf file
And this is what happens during the boot when the board gets connected to the phone
Configuring network interfaces... Successfully initialized wpa_supplicant
[ 25.263501] iwlwifi 0000:01:00.0: L1 Disabled; Enabling L0S
[ 25.276886] iwlwifi 0000:01:00.0: Radio type=0x0-0x0-0x0
[ 25.517342] iwlwifi 0000:01:00.0: L1 Disabled; Enabling L0S
[ 25.530725] iwlwifi 0000:01:00.0: Radio type=0x0-0x0-0x0
udhcpc (v1.20.2) started
Sending discover...
[ 26.455177] wlan0: authenticate with 02:73:8d:e3:ef:77
[ 26.525934] wlan0: send auth to 02:73:8d:e3:ef:77 (try 1/3)
[ 26.536771] wlan0: authenticated
[ 26.552293] wlan0: associate with 02:73:8d:e3:ef:77 (try 1/3)
[ 26.564178] wlan0: RX AssocResp from 02:73:8d:e3:ef:77 (capab=0x431 status=0 aid=1)
[ 26.584086] wlan0: associated
Sending discover...
Sending select for 192.168.43.24...
Lease of 192.168.43.24 obtained, lease time 43200
/etc/udhcpc.d/50default: Adding DNS 192.168.43.1
[ 31.935045] eth0: device MAC address 98:4f:ee:00:5c:61
udhcpc (v1.20.2) started
Sending discover...
Sending discover...
Sending discover...
No lease, failing
Starting rpcbind daemon...[ 41.722025] NET: Registered protocol family 10
[ 41.796897] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
done.
net.ipv4.conf.default.rp_filter = 1
net.ipv4.conf.all.rp_filter = 1
Starting atd: OK
INIT: Entering runlevel: 5
Starting system message bus: dbus.
Starting Connection Manager
Starting OpenBSD Secure Shell server: sshd
[ 43.541190] wlan0: deauthenticating from 02:73:8d:e3:ef:77 by local choice (reason=3)
[ 43.622199] cfg80211: Calling CRDA to update world regulatory domain
done.