Halo to all,
I have an Intel Server P4308CMHEN with the S2600CP.
Board Information: Product Name : S2600CP | Serial Number: QSCP35000469 | Part/Model Number : E99552-510 | FRU File ID : FRU Ver 1.00
I recently updated the BIOS to the latest, 02.03.0003BMC6580, and the update was successful
This update package includes the following system software updates:
- System BIOS - 02.03.0003 - ME Firmware - 02.01.07.328 - BMC Firmware - 01.21.6580 - FRUSDR - 1.11
The actual readings from the BMC console now are:
| BIOS ID : | SE5C600.86B.02.03.0003.041920141333 |
| BMC FW Rev : | 01.21.6580 |
| Boot FW Rev : | 01.17 |
| SDR Package Version : | SDR Package 1.11 |
| Mgmt Engine (ME) FW Rev : | 02.01.07.328 |
After the update the FANs are operating in full speed, ~8200RPM, and the server is extremely noisy. At the Sensor Readings of the BMC console it reports:
| BMC FW Health | sensor has failed and may not be providing a valid reading | Warning | 0x0010 |
I have attached the DebugLogs and the SELLOG
What I have done already:
Shutdown the server, remove both power cords for 30 seconds and the power on
Load BIOS defaults
Updated again the FRUSDR using the "FRUSDR.nsh" command and it was successful
Updated the BIOS again, successful
Please for your suggestions!
BR
Pantelis