I tried installing linux, there is a sata error in the startup log:
[ 5.696762] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 5.704060] ata1.00: ATA-8: SSD2SC240G1LCXXXXX21S459P, 600ABBF0, max UDMA/133
[ 5.704062] ata1.00: 468862128 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
[ 5.710372] ata1.00: configured for UDMA/133
[ 5.710620] scsi 1:0:0:0: Direct-Access ATA SSD2SC240G1LC763 600A PQ: 0 ANSI: 5
[ 5.710820] sd 1:0:0:0: [sda] 468862128 512-byte logical blocks: (240 GB/223 GiB)
[ 5.710861] sd 1:0:0:0: Attached scsi generic sg0 type 0
[ 5.711069] sd 1:0:0:0: [sda] Write Protect is off
[ 5.711072] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 5.711176] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 5.711789] ata1.00: exception Emask 0x10 SAct 0x2 SErr 0x280100 action 0x6 frozen
[ 5.711791] ata1.00: irq_stat 0x08000000, interface fatal error
[ 5.711793] ata1: SError: { UnrecovData 10B8B BadCRC }
[ 5.711796] ata1.00: failed command: READ FPDMA QUEUED
[ 5.711801] ata1.00: cmd 60/08:08:00:00:00/00:00:00:00:00/40 tag 1 ncq 4096 in
[ 5.711801] res 40/00:08:00:00:00/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
[ 5.711802] ata1.00: status: { DRDY }
[ 5.711806] ata1: hard resetting link
[ 5.893281] Console: switching to colour frame buffer device 240x67
[ 5.897708] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 5.897709] i915 0000:00:02.0: registered panic notifier
[ 5.902864] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 5.903323] acpi device:4a: registered as cooling_device9
[ 5.903406] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input4
[ 5.903541] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 6.028652] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)