Re: Problem with Intel Iris 5200 Pro at 3840x2160@60Hz
Hi again Silvia.... No news yet?¿2months and no solution?¿ PLEASE....HELP!
View ArticleUSB Serial FTDI Adapter Galieo gen2 (repurpose the Gen 1)
I tried to adapt the Gen 1 FTDI 3.5 mm to new GEN2 Galileo Board but something is wrong.I connected the pins to TX0 RX1 GND correctly on my Gen 2 board but in Putty nothing appears even if it works...
View ArticleRe: NUC DN2820FYKH: WARNING: Processor thermal trip at boot
I'Ve just gotten my new NUC box and installed Ubuntu on it. I'm getting the thermal trip message fairly regularly on boot. I've updated to the latest Bios. Is there any progress on this? I'm in...
View ArticleClik here to view.
Re: Intel yocto build BSP issue
Everytime I encounter the do fetch_error it is usually the internet (i can ping sometimes but now wget, you could try wget to make sure you can DL). I do not know about the QA Issue though. .
View ArticleRe: D54250WYK 'headless' issue?
I can report that a dummy VGA adapter really solved the problem. I bought one off Ebay for USD 10 and connected it to a Mini-DVI to VGA connector. I then re-activated the Intel video driver. After...
View ArticleRe: Help w DZ68DB bios. Restore to factory default without display.
This time the clock did reset - I can see the system time in the Windows XP settings..Alas there is still no way to change the BIOS settings because I can't see what is going on.Effectively I have...
View ArticleRe: Quark SoC ethernet interfaces in Debian
Hi Sergio, All OK, I found resolving for this problem.Main problem inside stmmac_pci.c For my board set .phy_addr = -1, /* not connected */ .bus_id = 2, When I fix this and rebuild...
View ArticleLED didn't work
I used the Arduino IDE burning the code in the Galileo, but it did't work. The code is from the Blink of examples.The I tried to burn it, but It shows information. #mv the downloaded file to...
View ArticleRe: Welcome Windows ...bye bye LINUX - LIVE
It's interesting that you think Windows will be better and more stable.From Microsoft's document "Windows will take about 2 minutes to boot" - you have to laugh out loud really. What on earth is it...
View ArticleRe: Intel AC7260 limited access after sleep
I have uninstalled Intel ProSet with driver 17.0.5 from Winodws 7. Now Windows 7 uses driver version 16.8.0.6 automatically. It doesn't seem to have reconnect-after-sleep problems anymore.
View ArticleRe: intel nuc bios in this system not fully ACPI compliant
Did you ever get this resolved? I'm having the exact same problem!
View ArticleClik here to view.
Re: Welcome Windows ...bye bye LINUX - LIVE
As I see it, its "welcome windows" but not quite buy buy to linux. It's a new tool that makes it possible to do development in Visual Studio in a very integrated way, with features not present in the...
View ArticleRe: DN2820FYKH DTS-HD?
So what happens to the customers who purchased the Celeron N2820 NUC thinking there was DTS-HD support under Windows as stated in the description of this product? (assuming it hasn't been updated)....
View ArticleIntel RST 13.1.0.1058 on Z87. HDD hangs with 100% usage and no head operation...
Hi!I've updated Intel RST and since that I have problem with Seagate SATA III HDD (ST31000524AS).HDD hangs for a 1 minute with 100% disk usage but it's not reading any data (0 B\s read\write) and this...
View ArticleRe: Intel RST 13.1.0.1058 on Z87. HDD hangs with 100% usage and no head...
I'm working on RAID SATA mode.
View ArticleRe: How best proceed with overheating i7-4790K?
Update : My retailer Scan tested my CPU and the motherboard together and found an an apparent overheating fault resulting in throttling when they are paired. They also tested an I7 4770K with the same...
View ArticleRe: DN2820FYKH and USB booting
Today I spend some time in trying different BIOS versions.Seems the OpenElec 4.1.4 x86_64 [DiskImage] USB-stick (UEFI) boot stopped working in BIOS FY0034, so I am currently running FY0032. Is this...
View ArticleWindows 8.1 not recognising external display hd4000
About a month ago Windows did an update and my external monitor stopped working. No luck with a TV connection either. By reverting to a previous driver it started working again. A week later it...
View Article