Re: New Bluetooth Drivers
Nothing suspicious. I was looking for any OEM driver that could be the cause. Do you have this issue on stock Windows install (no HP stuff)?
View ArticleRe: Intel Centrino Advanced-N 6230 and aptX
stix - I should have asked this before. Which version of BT software are you using? We are not able to reproducethe issue using our latest build. Which should be posted soon.
View ArticleRe: Serial connection to galileo has zero response via putty
Okay so i hooked up the connection to an oscilloscope finally. I have a usb to rs232 adapter plugged into a macbook pro (im guessing a usb3.0 port). I hooked up the oscilloscope to the output pins of...
View ArticleClik here to view.
Re: Corrupt Arduino IDE source archive on Software Downloads page
I am also having the same issue. I tried downloading the 7z archive on the link referenced in Galileo Getting Started - Windows. No luck so far.
View ArticleFan control
Hi, I am a video enthousiast and bought a W2600CR workstation for rendering and editing. I am new with server boards. I managed to get the machine up and running. Had a few hickups along the way, but...
View ArticleRe: Flashing edison over wifi (mac)
rosenrot you were spot on, with a new flash complete (v68) everything matches the doc perfectly. I'll have to wait to test the wifi upgrade method till a new version is released, but I pretty sure all...
View ArticleRe: Intel (R) Dual Band Wireless-N 7260 issue
I don't think, I have PROSET software on my PC. Also is it worth to get the NIC replaced with the same version? I understand there have been negative reports on it but from a technical point of view,...
View ArticleRe: SSH to my edison?
I found that once I had wifi working I was able to ssh to the IP of the edison without any hiccups. Nice.
View ArticleCannot update Driver to 15.33.22.64.3621
Hello, I have been trying to update my driver for quite a while now. The computer continues to give me a "not compatible with current operating system", when the INTEL Download Center says that it is...
View ArticleRe: Intel centrino wireless-n 2230 keeps dropping connection.
After months of problems with limited WiFi and general connectivity problems on Windows 8.1 I finally managed to get it to work properly. In advanced TCP/IP settings under IPv4 protocol settings I put...
View ArticleHD 4400 EU count
According to almost all sources I could find, all GT2 products (HD4200, HD4400, HD4600) have 20 EUs. However, on a i3-4130 (HD4400), GPU-Z (latest version) indicates 16 EUs. GPU Caps Viewer says 16 EUs...
View ArticleGigabit Ethernet is causing high CPU usage by DPCs process.
Gigabit Ethernet port is causing high CPU usage by DPCs process when downloading 200Mb/s and more data stream. When it goes to 45% CPU usage it can freeze whole OS. Specs:This has been observed on i3...
View ArticleClik here to view.
Re: Intel application to check X25-M G1 SSD usage, health etc.
It's a ThinkPad X60s, hence Intel 945GM Express chipset with ICH7-M (SATA I). Here's a screenshot with driver details. The driver was installed automatically during Windows 8.1 Enterprise installation.
View ArticleRe: Graphics Problem with LT Running Windows 7 Home Premium 64Bit
Thanks a ton Kory, however I have already done that. Why I sought your views on re-installation of Windows is on 21st evening while I was downloaeding a few files, my Laptop first hanged and then...
View ArticleRe: DN2820FYKH blank screen at boot
I have unfortunately found myself in the same situation, but with 10+ NUC's with the N2820 CPU and the same wrong Corsair 1333MHz RAM.. It has been out of share luck that my previously ordered NUC's...
View ArticleRe: Big scare: my D54250WYK would not start
I don't know how much it would help, but I would try this:Install the latest BIOS Revision 30, and after the update, F2 in and "Load the BIOS Defaults"Disable UEFI Boot (or alternatively Disable Legacy...
View ArticleRe: Node.js/Javascript IDE now available for Edison!
Yes, I will publish the code for the both the Edison/Galileo & 'Smart phone' parts of the demo. I will need to clean up the code and add comments first, hopefully I can get it done in the next...
View ArticleRe: Debian on Edison
That sounds great! Would you mind making the image available with some installation instructions? Is it possible to revert to the default Edison firmware after this? The default flashing procedure asks...
View ArticleEdison I/O
The Edison documentation mentions that its I/O runs at 1.8V. It doesn't state if it is tolerant up to 3.3V.Is there some page with this information?
View Article
