Re: Hardware-assisted Virtualization is Not Enabled - Win7/Pro & XP Mode
baumgrenze - I have had the same problem, and you are NOT going to believe this, but I found the cause, and it's...AVAST !!! On my Win 8, where HAV says it works, I do NOT use Avast AV. I've been...
View ArticleRe: Intel Xeon Phi Coprocessor 7120P / 1.238 GHz processor board in CAD...
You will get a better response in the Processors forum.I have moved your post there. Doc
View ArticleRe: Where is the "Edison Native Application Guide" PDF?
b1tninja, while I do have a copy of that document, I have seen many improvements and enhancements that obsolete much of that document as far as procedures go. As far as the gist - gcc/python on the...
View ArticleCP2102 driver
Does anybody have any pointers on getting a CP2102 driver installed in the Edison Yocto distribution? I've verified that my Edison can see the USB device just fine with dmesg, but it doesn't create a...
View ArticleRe: Edison opkg package repo created
I'm attempting to npm install openzwave, which builds the openzwave C++ library, which depends on libudev. The opkg repo contains libudev1, but that's just the shared libraries, and there's no...
View ArticleHow to set Python Environment prior to login so can run a python program at...
Hi AllI am trying to run a python program that activates the I2C bus and displays the IP address on a I2C LCD.I have a script that runs ntpd and then starts a python program on startup, but when the...
View ArticleD54250WYKH USB 3 does not work with 7260HMW
Couldn't use a Leef USB 3 flash drive, neither for booting nor was it recognized by the os. Found a hint that the problem might be an incompatibility with the wifi card. After removing the card the...
View ArticleRe: what is wrong with SPI 1.0.4 ?
Did you patch the SPI and boot your board ? I guess you did not... SD release is fine for me
View ArticleRe: How best proceed with overheating i7-4790K?
Wow, I haven't touched my Hero board yet to check it out. It would be suck to not be able to use it at full potential. I have a paper due tomorrow so don't have time to test it yet, but I do hope that...
View ArticleRe: problem in building yocto linux image for galileo
just added some layers in bblayers.conf file sir, like meta -yocto-bsp,clanton-distro,clanton -bsp
View ArticleRe: failed to build yocto project for Galileo
i am trying to build the yocto linux image for intel galileo using eglibc sir
View ArticleRe: failed to build yocto project for Galileo
any how i removed the build the build folder and again started building sir
View ArticleRe: How best proceed with overheating i7-4790K?
I'm glad you said something about the Asus Z97 AR, I was thinking about it as possible replacement. My 4790k idles around 32c but shoots up to high 80's during non-avx stress and 99+ with avx load...
View ArticleRe: How best proceed with overheating i7-4790K?
I'm running computation for chemistry with it and it peaked to 100C in seconds with Turbo boost. Once I transfer it to the Hero, I will use the Hyper 212 Evo to cool it to see if there is any change. I...
View ArticleRe: How best proceed with overheating i7-4790K?
Now that you stated that motherboard was your problem I payed attention to this VCORE value on the motherboard. Is this normal?
View ArticleRe: Edison on development Arduino board will not respond from putty
Do you have a second micro-B cable? Plug in both if you do, and you should see both in the Ports menu in the "device manager" utility, one as a regular com port, and the other as a virtual com port....
View ArticleRe: How best proceed with overheating i7-4790K?
The thing is that the CPU is probably fine. It's the motherboards. Don't know if its something wrong with bios setting or defective component like power vrm.
View ArticleRe: Best processor upgrade for a HP Pavilion Elite m9050la?
The E4500 uses socket LGA775: ARK | Intel® Core™2 Duo Processor E4500 (2M Cache, 2.20 GHz, 800 MHz FSB)Processors that are compatible with the 945G chipset are: ARK | Intel® 945G Express Chipset...
View Article