DZ75ML-45K Boot Failure with "WD FIRE" LED glows consistently.
Following is the phases of MB behaviour: System has been switched ON. All Fans have been started spinning normally. In 3 seconds, BEEP-1 Sec Pause-BEEP-1 Sec Pause-BEEP started. Now the System...
View ArticleHD 4000 No longer powering high resolution monitor
After updating to windows 8.1 and installing the new intel driver for HD 4000, I can no longer run a custom mode of 2560x1440 at 55hz over hdmi. This worked fine for months, but now I get the bandwith...
View ArticleHD 4600 HDMI audio problem
Hi There, I have a Gigabyte GA-H87N-WIFI board, with an Intel Core i3 4340 processor (with HD 4600 graphics). My PC is set up as a home theatre PC, and I'm really struggling with audio issues that I...
View ArticleRe: NUC D54250WYK 4 System Build Questions
paul456, allow me to answer your questions below:Tested mSATA SSDs:Intel� NUC; Tested...
View ArticleRe: Accidently Created Volume/Array
I did the exact same thing. Did you ever get a response to this question--looks like not.
View ArticleRe: NUC D54250WYK 4 System Build Questions
It is indeed a reasonable expectation but some devices work differently between brands and models. We also have this other article with different drives; some of them appear to be the ones you...
View Articles5000psl No display
Hello; I just bought a S5000PSL board (used). i have 2 intel xeon cpus installed as well as 16gb ECC FBDIMM. I have reset the cmos as well as stripping it down to 1 DIMM and still no display. When it...
View ArticleRe: Pentium G840 HD Graphics Driver for Windows 8.1
Hi airfrog, Here you have the download link for Win 8.1 for your...
View ArticleRe: constantly synchronizing raid1
Hi PaulJurczak, This is because it is constantly checking the structure even though if there are no problems with it. Also, this checking process can take longer depending on the HDD capacity.
View ArticleRe: update to Win8.1
Since you mention that this video card was working fine on a Windows 8 64 bit environment, this could be a compatibility issue with the current operating system, w8.1 and the video card drivers. So I...
View ArticleRe: Intel(R) PRO/Wireless 3945ABG connection problems after upgrading to Win 8.1
There was an error in the scheduled task: An event ID thrown at system wake up was missing. I've also changed the task configuration from "Windows Vista" type to Windows 8.1. Now I've tested in...
View ArticleRe: DH61AG & Windows digital cable advisor
I also can't get sound out of HDMI after updating my DH61AG to the new-gen BIOS (099 or later). I have a 2nd-gen Core processor running Win7, and have tried clean installs, checking BIOS settings etc....
View ArticleRe: DH61AG: no HDMI audio after BIOS update
Same problem here, updating DH61AG to the new-gen BIOS (versions 099 - 106) breaks HDMI audio. I have a 2nd-gen Core processor running Win7, and have tried clean installs, reset BIOS settings (and of...
View ArticleClik here to view.
Re: DH87RL SATA Hot-Plug Problem
Hello Mobau, if hot-swap is “enable” on BIOS, you will be able to remove and install the hard drives connected to the SATA ports. They act as a regular USB device, just be careful to not disconnect it...
View ArticleRe: Lg lA6200 widi not working on windows 8
Thanks for reporting the issue, we are taking a look into it.
View ArticleRe: s5000psl No display
ok, I tried the BMC force update, still no display and still the same LED code. I really appreciate the help. Is there anything else i could try?
View ArticleRe: Serious UEFI issue with DZ87KLT-75K
Hi Silvia, S/N BQKT3340009WAA# G74721-304 i also noticed other issues which i did not want to mention at first but:there is no way to select a memory profile. Only the slider in the memory tab...
View ArticleClik here to view.
Re: How to get intel out of the windows context menu?
Carsten888, this procedure should work on any Windows environment. My Demo is using Windows 8, and I was able to remove those options from the menu.I recommend you to contact Microsoft, since these...
View Article