Re: server 2600cp2 is not starting
Okay But i have checked following low voltage RAM. MT18ksfig72AZ-1g6e1ze (Micron) its voltage is 1.3 it also not working
View ArticleRe: server 2600cp2 is not starting
Which processor exactly are you using? And which display port are you using? Display Port or VGA?
View ArticleRe: server 2600cp2 is not starting
Hi processor is 1230-v3 and i am using VGA for display
View ArticleRe: IR Power On with D34010WYK Nuc
Hi, i have the D34010WYK and i think that i have the same problema that yours. I use a MCE remote with Windows 8.1 and XBMC and i can power on the nuc with the remote. But when i install OE I can use...
View ArticleRe: useless wifi on the NUC??
Hi Sylvia. It is a TP-Link WDR4900 v1 with the latest firmware and the NUC also has the latest BIOS and drivers.. wifi is now off as it is too slow, such a pity.. CheersMark
View ArticleRe: Does the Wire library work on Galileo?
Thanks for all the help guys, very informative.
View Articlesupport Board memory?
Hello!I need helpsupport this memory KINGSTON VALUERAM KVR1333D3Q8R9S/8G Intel® Server Board S5520UR?
View ArticleRe: support Board memory?
Please check the Tested memory and hardware list. Please note that for most Kingston memories, there is an "I" at the end of the model number, which indicates tested for Intel server boards.
View ArticleIn-Kernel led registration
Hi all, Been poking some more at my Galileo and found the sd-card led some place inside /sys/class/pci/.(was kinda funny to set it's trigger to heartbeat, but not so usefull)although the code for it...
View ArticleRe: support Board memory?
I did not find support there memory 8G 1333МГцin the manual does not say anything about ithttp://download.intel.com/support/motherboards/server/s5520ur/sb/e44031012_s5520ur_s5520urt_tps_r1_9.pdf
View ArticleRe: RAID1 Failed: One of the harddisk broken then replace a new one, but...
Thanks very much kevin!I resolve this problem using your method!
View ArticleClik here to view.
Re: Crucial Memory incompatibility With NUC DC3217BY?
I recommend using high density CT51264BF160BJ and not to use CT2KIT51264BF160B CT2KIT51264BF160B is somtimes listed as compatable but sometimes not.I know CT51264BF160BJ is OK but CT2KIT51264BF160B may...
View ArticleRe: Using Galileo Linux over Ethernet(Telnet)
Hello, this works for me, I succeeded at connecting my terminal to the board using telnet. But, I am trying to send commands directly from terminal how can I do this? What are the commands and...
View ArticleIntel(R) HD Graphics 3000 HDMI not detected!
i install the intel graphics driver. but my computer use HDMI connetion to my TV.TV show "no signal"!!after i uninstall the "Intel Graphics driver", restart my computer, my computer connection TV is...
View ArticleRe: Intel ProSet Update Problem
Intel has released ProSet version 17.0.0.0 with the right files. Problem solved.
View ArticleRe: Official Black-screen thread - We need your help!
Are you willing to send your system to us? (Yes/No)YesIs your system a laptop or desktop?Shuttle PCWhat is the make/model of your system? (COMPLETE model name required)Zotac Fusion 350-A-E E350 M1...
View ArticleRe: Do the UART0 TX and RX can work by default
Thanks for replying. what should i do to set gpio40, 41 and gpio4 to low? by hardware jumper or need to write software to set it? thx.
View ArticleRe: Correlation between driver versions in Device Manager and Intel versions ?
Did you see this table http://www.intel.com/support/wireless/wlan/sb/CS-034315.htm?wapkw=wireless+driver+version+for+proset ? Regards. Peter
View ArticleRe: NUC Haswell reboots after shutdown
I too have these problems. Can't wait for a proper fix!
View ArticleRe: NUC Haswell reboots after shutdown
Yeah, having IR work not only when switching the NUC On but also after loading a Linux distribution such as XBMCbuntu is something I really would like to see! I read somewhere Linux is not officially...
View Article